We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

McDavid Basketball Knee Pads Size Chart: How to Find Your Fit

Use this mcdavid basketball knee pads size chart guide to measure your legs correctly, match your size, and avoid pads that slip or pinch on court.

Updated November 2026

A mcdavid basketball knee pads size chart is only useful if you measure the right part of your leg and read the numbers correctly. This guide walks you through taking accurate measurements, matching them to a size, and checking the fit before you commit to a pair. The goal is pads that stay put through cuts, rebounds and floor dives without restricting your stride.

Why Measuring Matters More Than Your Shoe or Shirt Size

Knee pads are sized to the circumference of the leg at a specific point, not to your overall body size. Two players who both wear a medium shirt can need very different knee pad sizes depending on calf and thigh build. Manufacturers typically specify measurements in inches, so skipping the tape measure and guessing is the most common reason players end up with the wrong pair.

Shopping for one? See our guide: 4 Best Basketball Knee Pads McDavids for Court Play (2026).

How to Measure for a McDavid Knee Pad Size Chart

Before you start, stand upright with your feet about shoulder-width apart and your weight evenly distributed. Use a soft cloth tape measure and keep it level around the leg. Do not pull it tight enough to dent the skin.

  1. Measure the circumference of your thigh about 4 to 6 inches above the top of your kneecap.
  2. Measure the circumference of your calf at its widest point, usually about 12 to 14 inches below the kneecap.
  3. Measure the knee itself by wrapping the tape around the center of the kneecap.
  4. Record each number in inches and repeat each measurement once to confirm it.
  5. Compare your numbers to the size chart on the product page for the specific model you want.

Choosing Between Two Sizes

If your measurements fall between two sizes, look at which dimension is closest to the top of the range for each size. Players who slide and dive often do better with the slightly larger option, since it reduces pressure points. Players who prioritize a snug, low-profile feel usually prefer the smaller size, provided the pad does not pinch behind the knee when bent.

Checking Fit Before and During Play

Once you have a pair, put them on and perform a short movement check. Squat, lunge, jump and shuffle laterally. The pad should stay centered over the kneecap without rolling down, and you should feel no sharp pressure behind the knee or at the top strap. Owners often report that pads feel loose during the first few minutes of warm-up but settle as the straps and sleeve adjust, so give them a full session before deciding.

Check Good Fit Poor Fit
Kneecap position Centered and stays put during lunges Shifts sideways or sits low
Behind the knee Comfortable when fully bent Pinching or tightness
Sleeve movement Slides without bunching Rolls down during cuts
Circulation No numbness or tingling Foot or calf feels cold or numb

Common Mistakes When Using a Size Chart

  • Measuring over clothing, which adds bulk and inflates the numbers.
  • Using a shoe or shirt size instead of the leg measurements in the chart.
  • Pulling the tape tight enough to compress the skin, which gives a false small reading.
  • Ignoring the sleeve or compression component when comparing numbers.
  • Buying a pair that fits only when standing still and not after a full range of motion test.

A flexible cloth tape measure makes the process far more accurate than a rigid ruler, since it follows the natural contour of the leg.

View on Amazon

A pair of compression sleeves can help you check how the pad sits over a second layer, which is useful if you wear tights or sleeves under your pads during play.

View on Amazon

FAQ

Should I measure my legs with or without socks?

Measure bare skin or with the same thin layer you plan to wear under the pads. Socks and thick clothing can shift your reading by enough to change the size you need.

What if my calf and thigh fall into different sizes?

Choose the size that fits the thigh measurement first, since that area sets the sleeve tension. Then confirm the calf still sits comfortably without pinching.

Can I return knee pads that do not fit?

Return policies vary by retailer, so check the terms before you wear the pads on court. Keep the original packaging and tags, and avoid heavy use until you have confirmed the fit.

Conclusion

Use a flexible tape, measure the thigh, calf and knee carefully, and compare the numbers to the official chart for your model. Test the fit with lunges and jumps before a real session. If pain, numbness or circulation problems persist, consult a physical therapist or sports medicine professional.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our basketball endurance & training gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Basketball Marathon.