We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Put Net on Pool Basketball Hoop: A Step-by-Step Guide

Learn how to put net on pool basketball hoop in a few steps. Fit the net to the rim, secure it so it stays put in the water and keep it from tangling.

Updated November 2026

To put a net on a pool basketball hoop, you thread the net’s loops or hooks onto the rim, pull the net taut so it hangs straight, and secure the bottom so it stays put in the water. The whole job usually takes 15 to 30 minutes with a helper and a few basic tools. Done right, the net stays tight, doesn’t snag on the water and holds its shape through a full afternoon of shooting.

What You Need Before You Start

Gather everything first so you aren’t climbing in and out of the pool mid-install. Most pool hoops take a standard basketball net with a set number of loops, and the rim will have matching attachment points.

Shopping for one? See our guide: 4 Best Basketball Hoops with Chain Net Options for Outdoor Play (2026).

  • A basketball net sized for your rim (most pool hoops use a standard 12-loop or 6-loop design; count your rim’s attachment points before buying)
  • Flat-nose pliers or a pair of gloves for gripping small hooks
  • A dry towel to wipe the rim and hands before handling the net
  • A helper, ideally, to hold the net steady while you thread it
  • Zip ties or small cord for any loop that doesn’t sit snugly

Step-by-Step Installation

Step 1: Remove the Old Net and Clean the Rim

Take off the old net by unhooking each loop or clip, working from one side of the rim around to the other. Rinse the rim with fresh water to remove chlorine residue and algae, then dry it. Clean attachment points give the new net a better grip and reduce slipping.

Step 2: Attach the Loops at the Top

Start with the loop at the front center of the rim, then work outward on each side. Pull each loop over the rim and seat it fully. Skipping loops or doubling up on one spot will make the net hang crooked.

Step 3: Pull the Net Taut and Check Alignment

Once every loop is on, pull the bottom of the net gently downward so the strands are even and the net hangs straight. Look at it from the side and the front. If one side bunches, unhook the nearest loop and reseat it. A well-seated net should hang at a consistent length all the way around.

Step 4: Secure the Bottom

Most pool hoops use a bottom ring, clip or tie point to keep the net from floating up. Connect it according to your hoop’s design. If the net has a loose tail that drifts in the water, tie it off with cord or a zip tie so it stays under the rim.

Common Mistakes to Avoid

  • Forgetting to rinse the rim: chlorine and algae make loops slip and wear faster.
  • Stretching loops too far: overstretching weakens the material and shortens the net’s life.
  • Leaving the net too long: a net that touches the water surface tangles and gets heavy.
  • Skipping a check after the first session: loops can shift once the water moves, so recheck the fit after your first few games.
  • Installing with wet hands on small hooks: they slip, so dry your hands or use gloves.
  • Flat-nose pliers: help you pull small hooks and loops onto a tight rim without scraping your fingers. View on Amazon
  • Replacement pool basketball net: a matched net designed for pool rims fits better than a generic outdoor net. View on Amazon
  • Heavy-duty zip ties: secure loose tails and keep the bottom from floating. View on Amazon

FAQ

Can I use an outdoor basketball net in a pool?

Often yes, but check the length and loop count against your rim. Nets made for pool use typically handle water exposure better, so they are the safer choice for long-term use.

How often should I replace the net?

It depends on use and chlorine exposure. Replace it when the strands fray, loops stretch out or the net no longer hangs evenly.

Why does my net keep floating up?

Usually the bottom isn’t secured. Tie or clip the tail point so the net stays under the rim, and check that the loops are fully seated.

Conclusion

Putting a net on a pool basketball hoop comes down to clean attachment points, even loops and a secured bottom. Follow the steps in order and recheck the fit after your first session. For more on choosing and replacing nets, see Replacement Net for Pool Basketball: How to Choose, Fit and Swap One Out and Portable Basketball Hoop for Pool: How to Choose and Use One Safely.

Colin Foster

About Colin Foster

Colin Foster is part of our editorial team and reviews and edits our basketball endurance & training gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Colin Foster
Colin Foster

Colin Foster writes reviews and buying guides for Basketball Marathon.